Manganese(II) Trifluoromethanesulfonate
Manganese bis(trifluoromethanesulfonate)
CAS: 55120-76-8
Molecular Formula: CHF3MnO3S
Manganese(II) Trifluoromethanesulfonate - Names and Identifiers
Manganese(II) Trifluoromethanesulfonate - Physico-chemical Properties
| Molecular Formula | CHF3MnO3S |
| Molar Mass | 205.01 |
| Melting Point | >400°C |
| Storage Condition | Inert atmosphere,Room Temperature |
Manganese(II) Trifluoromethanesulfonate - Risk and Safety
| Hazard Symbols | C - Corrosive |
| Risk Codes | R22 - Harmful if swallowed R34 - Causes burns |
| Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection. S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) |
| UN IDs | UN 3261 8 / PGII |
| WGK Germany | 3 |
Manganese(II) Trifluoromethanesulfonate - Introduction
Manganese bis(trifluoromethanesulfonate), the chemical formula Mn(Tf)2, is a compound containing a manganese ion and a triflate ion. The following is a description of the nature, use, method and safety information of Manganese bis(trifluoromethanesulfonate):
Nature:
- Manganese bis(trifluoromethanesulfonate) is a white crystalline solid.
-It is stable at room temperature and not easy to decompose.
- Manganese bis(trifluoromethanesulfonate) is soluble in polar solvents such as acetonitrile and dimethyl sulfoxide.
Use:
- Manganese bis(trifluoromethanesulfonate) can be used as a catalyst to promote oxidation and reduction reactions in organic synthesis reactions.
-It can be used to prepare organometallic compounds, such as organomanganese complexes.
- Manganese bis(trifluoromethanesulfonate) is also used in the electronic field as a part of liquid crystal display materials.
Preparation Method:
-The usual method for preparing Manganese bis(trifluoromethanesulfonate) is to react trifluoromethanesulfonic acid with anhydrous manganese salt, such as manganese chloride.
-In the laboratory, excess trifluoromethanesulfonic acid can be used to dissolve the product, and then the pure Manganese bis(trifluoromethanesulfonate) can be obtained by removing the solvent.
Safety Information:
- Manganese bis(trifluoromethanesulfonate) has no obvious toxicity under normal conditions.
-Because it is a solid, avoid inhaling dust when using it.
-contact with its skin may cause irritation, so the operation should wear protective gloves.
-Avoid contact with strong oxidants and strong acids during operation or storage to prevent dangerous reactions.
Please note that this is a general description and not exhaustive information. In practice, the specific Safety Data Sheet (SDS) should be consulted for accurate and detailed safety information.
Nature:
- Manganese bis(trifluoromethanesulfonate) is a white crystalline solid.
-It is stable at room temperature and not easy to decompose.
- Manganese bis(trifluoromethanesulfonate) is soluble in polar solvents such as acetonitrile and dimethyl sulfoxide.
Use:
- Manganese bis(trifluoromethanesulfonate) can be used as a catalyst to promote oxidation and reduction reactions in organic synthesis reactions.
-It can be used to prepare organometallic compounds, such as organomanganese complexes.
- Manganese bis(trifluoromethanesulfonate) is also used in the electronic field as a part of liquid crystal display materials.
Preparation Method:
-The usual method for preparing Manganese bis(trifluoromethanesulfonate) is to react trifluoromethanesulfonic acid with anhydrous manganese salt, such as manganese chloride.
-In the laboratory, excess trifluoromethanesulfonic acid can be used to dissolve the product, and then the pure Manganese bis(trifluoromethanesulfonate) can be obtained by removing the solvent.
Safety Information:
- Manganese bis(trifluoromethanesulfonate) has no obvious toxicity under normal conditions.
-Because it is a solid, avoid inhaling dust when using it.
-contact with its skin may cause irritation, so the operation should wear protective gloves.
-Avoid contact with strong oxidants and strong acids during operation or storage to prevent dangerous reactions.
Please note that this is a general description and not exhaustive information. In practice, the specific Safety Data Sheet (SDS) should be consulted for accurate and detailed safety information.
Last Update：2024-04-10 22:29:15
Supplier List
Spot supply
Product Name: Manganese bis(trifluoromethanesulfonate) Request for quotationCAS: 55120-76-8
Tel: 15001012717
Email: biz5@infsci.com
Mobile: 15001012717
QQ: 3007471201
Product List: View Catalog
Spot supply
Product Name: Manganese bis(trifluoromethanesulfonate) Request for quotationCAS: 55120-76-8
Tel: 15001012717
Email: biz5@infsci.com
Mobile: 15001012717
QQ: 3007471201
Product List: View Catalog
View History